Fierce Domain Scan by FIERCE @ Kali Linux

1.   This post gives a stepped screen shot version of a relatively unknown but powerful tool known as Fierce. It is a perl script written by rsnake. Fierce tries multiple techniques to find all the IP addresses and hostnames used by a target. Fierce is meant specifically to locate likely targets both inside and outside a corporate network.A very detailed explanation with ease is given at http://ha.ckers.org/fierce/

2.  To use Fierce, navigate to Information Gathering | DNS Analysis | Fierce.
Fierce will load into a terminal window as shown in the following screen shot.

BACKTRACK 5 R3 : ReverseRaider

1.   This post will brief on a tool known as Reverse Raider available in the information gathering menu drop down in Backtrack 5

About the Tool 

2.   ReverseRaider is a domain scanner that uses various techniques, such as wordlist scanning to find target's subdomains or reverse resolution for a range of ip.It's fully multi-threaded and supports permutation on wordlist, IPv6 and various DNS options (e.g. no-recursion).

3. Developed by  Acri Emanuele at crossbower@gmail.com

Usage: reverseraider -d domain | -r range [options]
 

Options:

  -r    range of ipv4 or ipv6 addresses, for reverse scanning
        examples: 208.67.1.1-254 or 2001:0DB8::1428:57ab-6344
  -f    file containing lists of ip addresses, for reverse scanning
  -d    domain, for wordlist scanning (example google.com)
  -w    wordlist file (see wordlists directory...)
 

Extra options:
  

  -t    requests timeout in seconds
  -P    enable numeric permutation on wordlist (default off)
  -D    nameserver to use (default: resolv.conf)
  -T    use TCP queries instead of UDP queries
  -R    don't set the recursion bit on queries

4.   Most of the  DNS enumeration scripts available in backtrack focus on typical DNS but reverseraider does what it sounds like it might do which is enumerate reverse DNS names. Enumerating reverse DNS on an IP or set of IP’s can sometimes reveal information you did not previously have. It is possible to be targeting a web server that has a bunch of virtual hosts and you prefer to track down primary web site on the web server which is where reverseraider may provide the results necessary as it is more likely that the most important site on the virtual web server has reverse DNS configured on the host itself. 

5.   I found out this very useful and exhaustive post at http://www.question-defense.com/2012/04/01/backtrack-5-information-gathering-network-analysis-dns-analysis-reverseraider

This post gives an excellent description with details of three methods of using reverseraider.

BACKTRACK 5 R3 : LBD [ Load Balancing Detector ]

1.   Before we start working on this tool,we need to first get clear of what exactly is Load Balancing?

2.    Load balancing is a method to distribute workload over multiple computers , network links, central processing units, disk drives, or other resources, to achieve optimal resource utilization, maximize throughput, minimize response time, and avoid overload. So before any one performs a penetration test, some recon work needs to be done on the target domain to make sure it does not have the ability to misdirect any probes and attacks.

About the Tool : LBD

3.   LBD (Load Balancing Detector) is a small script that tells if a given domain uses DNS and/or HTTP Load-Balancing (via Server: and Date: header and diffs between server answers). The main purpose of the tool is to check if the given domain uses load balancing.In other words when a server uses load balancing to distribute its work load over multiple systems, it should not get clogged up with excessive requests that prevents disruptions. This will mostly be applicable to renowned websites to reduce their system workload and to prevent malicious DOS attacks.

Usage : ./lbd [Domain]

4.    I could not find any switch option that can be used with the command ....so the usage is simple....I have tried this on two sites : certifiedhacker.com and dvwa.co.uk.Screen shots of the results obtained are seen below :

BACKTRACK 5 R3 : FIERCE

1.  What's in a name ? But here when the name of the tool is FIERCE...it has the potential to grab eyeballs....about FIERCE first....Fierce is a perl script written by RSnake and helps at the first steps of a pentesting ie the reconnaissance. The focus of any pentester  is to gather as much info as possible about the target before starting the attack.Exactly like earlier tools discussed in the Information Gathering drop down of Backtrack 5 R3,FIERCE is used for DNS Enumeration and is a great tool for discovering non-contiguous IP address for a certain company. It is difficult to discover and gather information about a company network which is non-contiguous using traditional tools. Though we can use a normal scanner against an IP range, but if the IP ranges are nowhere near one another there may be chance of missing chunks of networks. For this type of situation FIERCE is used.The following is the working process of FIERCE.

First it asks DNS for the DNS servers of the target. If DNS server of target is misconfigured then fierce attempts to dump the SOA records for the domain. If it fails then it attempts to "guess" names that are common amongst different companies using bruteforce.

2.   The info gained from this tool FIERCE can be used by subsequent tools to be used like nmap, unicornscan, nessus, nikto, etc, since all of those require that you already know what IP space you are looking for.  This does not perform exploitation and does not scan the whole internet indiscriminately.  It is meant specifically to locate likely targets both inside and outside a corporate network.  Because it uses DNS primarily you will often find mis-configured networks that leak internal address space. That's especially useful in targeted malware.

SYNTAX :  perl fierce.pl [-dns example.com] [OPTIONS]  

3.  The switches that can be used with this command are shown in the screen shot below :

(Click on the Image to enlarge)

4.    So I tried running the tool on certifiedhacker.com & dvwa.co.uk and the output is shown below vide a screen shot :

certifiedhacker.com

(Click on the Image to enlarge)

dvwa.co.uk

(Click on the Image to enlarge)

 

(Click on the Image to enlarge)

This info will be good enough to march ahead from a pen tester point of view!!!!!!