Wanna sync Two Harddisks / Two Folders : GRSYNC is there for you!!!!

1.   I have two harddisks of 500 gb and I have loads of data in both...but i could never find out time to set my data at one place and then make a clone kindda or a bakup of the other...it is a herculean task if you keep updating your one harddisk regulary...so the crude rule says that you must copy the updated folder to the backup drive and then keep replacing the older one's....but if the data is too much and the files are in thousands and you have lesser time wouldn't you like to simply click one button and auto syn the complete folder or the harddrive at one go!!!!!What if you have the following GUI that give a whole lot of options to play around...like in the screen shot below :

 

 

2.  Isn't this simple and great...no need to bug yourself trying to find what was old and what is newer...what to keep and what not to keep... you simply see the options above and you will be able to figure out how helpful this utility can be if u have not been suing this till date....The best part is that it is very simple to use.

3.   Grsync is a Graphical User Interface (GUI) for the rsync synchronization tool under Linux / Unix System. There are also ports of Grsync on Windows and OS X platforms. Grsync is released under the terms of the GNU General Public License (GPL), so it is free software, and makes use of the GTK+ UI toolkit. In addition, it has support for the Unity user interface. It can be effectively used to synchronize local directories and supports remote targets (although in a limited way).

How do u install this in FEDORA ?

 4.   A simple type yum install grsync with root privileges will do the needful.....

Creating ISO images in Linux : FEDORA 19

1.  Few useful commands to create ISO images in linux :

First install mkisofs from root by typing :

yum install mkisofs

In most of the recent linux distros...this would invariably be pre-installed...the above command will work for yum installations

If u require to create an iso file from a directory containing other files and sub-directories via the terminal, you can use the following command:

mkisofs -o image.iso -R /path/to/folder/

An example is shown below : here YOURFILE is the name of the ISO image that will be created and then is the route where the data is stored.

mkisofs -o YOURFILE.iso -R /run/media/kurta/CEH\ Tools\ Vol-1/

Fedora 19 USB automount doesn't work : SOLVED

Having installed Fedora 19 Schrodinger's Cat recently, a problem came up that the USB that used to get auto detected in earlier versions stopped working......and could not be seen anywhere in the file manager...and the disk showed the following screen which has no USB disk.

(CLICK ON THE IMAGE TO ENLARGE)

But the good thing is that on doing LSUSB at the terminal it was being shown as follows :

Bus 001 Device 002: ID 4033:0042 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 4051:0030 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 3d4b:0008 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1f6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0f6d:081b Logitech, Inc. Webcam C310
Bus 001 Device 004: ID 0c61:4d0f Primax Electronics, Ltd HP Optical Mouse
Bus 002 Device 005: ID 03f0:5201 Sandisk 

so mounted it the terminal way..

make a directory in home by the name of usb

mkdir usb

and

at the terminal type lsblk that will give you where to mount.In my case it is sdc1. My output comes as follows :

NAME            MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda               8:0    0 931.5G  0 disk 
├─sda1            8:1    0 488.3G  0 part 
└─sda2            8:2    0 443.2G  0 part 
sdb               8:16   0 465.8G  0 disk 
├─sdb1            8:17   0   100M  0 part 
├─sdb2            8:18   0   500M  0 part /boot
└─sdb3            8:19   0 465.2G  0 part 
  ├─fedora-swap 253:0    0   5.8G  0 lvm  [SWAP]
  ├─fedora-root 253:1    0    50G  0 lvm  /
  └─fedora-home 253:2    0 409.4G  0 lvm  /home
sdc               8:32   1    30G  0 disk 
└─sdc1            8:33   1    30G  0 part /home/kalama/usb
sr0              11:0    1  1024M  0 rom 

now at the terminal simply type

mount -t vfat /dev/sdc1 /home/kalama/usb/


thats it ..now it will start showing when you do df -h as shown below :

[root@localhost ~]# df -h
Filesystem               Size  Used Avail Use% Mounted on
/dev/mapper/fedora-root   50G  4.8G   42G  11% /
devtmpfs                 2.9G     0  2.9G   0% /dev
tmpfs                    2.9G  664K  2.9G   1% /dev/shm
tmpfs                    2.9G  968K  2.9G   1% /run
tmpfs                    2.9G     0  2.9G   0% /sys/fs/cgroup
tmpfs                    2.9G   36K  2.9G   1% /tmp
/dev/sdb2                477M  117M  331M  27% /boot
/dev/mapper/fedora-home  403G  173M  383G   1% /home
/dev/sdc1                 30G   16G   15G  53% /home/kalama/usb

FEDORA 19 BETA INSTALLATION

The screen cord shows the guide to Fedora 19 " Schrödinger's Cat " Beta Installation on a Virtual Box.